{
  "version": 2,
  "name": "Mosquito 556",
  "board": {
    "rows": 10,
    "cols": 16,
    "kind": "strip"
  },
  "cuts": [
    "1,6",
    "2,6",
    "3,6",
    "4,6",
    "5,6",
    "6,6",
    "7,6",
    "7,10",
    "8,12"
  ],
  "parts": [
    {
      "id": "mq01mos",
      "kind": "link",
      "ref": "J1",
      "pins": [
        [
          2,
          4
        ],
        [
          6,
          4
        ]
      ]
    },
    {
      "id": "mq02mos",
      "kind": "link",
      "ref": "J2",
      "pins": [
        [
          2,
          9
        ],
        [
          3,
          9
        ]
      ]
    },
    {
      "id": "mq03mos",
      "kind": "link",
      "ref": "J3",
      "pins": [
        [
          5,
          0
        ],
        [
          8,
          0
        ]
      ]
    },
    {
      "id": "mq04mos",
      "kind": "link",
      "ref": "J4",
      "pins": [
        [
          7,
          9
        ],
        [
          8,
          9
        ]
      ]
    },
    {
      "id": "mq05mos",
      "kind": "link",
      "ref": "J5",
      "pins": [
        [
          0,
          1
        ],
        [
          4,
          1
        ]
      ]
    },
    {
      "id": "mq06mos",
      "kind": "link",
      "ref": "J6",
      "pins": [
        [
          0,
          10
        ],
        [
          1,
          10
        ]
      ]
    },
    {
      "id": "mq07mos",
      "kind": "link",
      "ref": "J7",
      "pins": [
        [
          0,
          12
        ],
        [
          5,
          12
        ]
      ]
    },
    {
      "id": "mq08mos",
      "kind": "link",
      "ref": "J8",
      "pins": [
        [
          7,
          4
        ],
        [
          9,
          4
        ]
      ]
    },
    {
      "id": "mq09mos",
      "kind": "res",
      "ref": "R1",
      "value": "1k",
      "pins": [
        [
          0,
          3
        ],
        [
          1,
          3
        ]
      ],
      "device": "fixed",
      "mount": "vertical"
    },
    {
      "id": "mq10mos",
      "kind": "res",
      "ref": "R2",
      "value": "1k",
      "pins": [
        [
          5,
          14
        ],
        [
          8,
          14
        ]
      ],
      "device": "fixed"
    },
    {
      "id": "mq11mos",
      "kind": "cap",
      "ref": "C1",
      "value": "10n",
      "pins": [
        [
          6,
          3
        ],
        [
          9,
          3
        ]
      ],
      "device": "ceramic disc"
    },
    {
      "id": "mq12mos",
      "kind": "cap",
      "ref": "C2",
      "value": "10n",
      "pins": [
        [
          3,
          10
        ],
        [
          9,
          10
        ]
      ],
      "device": "ceramic disc"
    },
    {
      "id": "mq13mos",
      "kind": "cap",
      "ref": "C3",
      "value": "100n",
      "pins": [
        [
          0,
          2
        ],
        [
          7,
          2
        ]
      ],
      "device": "ceramic disc"
    },
    {
      "id": "mq14mos",
      "kind": "ecap",
      "ref": "C4",
      "value": "10u",
      "pins": [
        [
          6,
          11
        ],
        [
          7,
          11
        ]
      ],
      "polarized": true,
      "mount": "vertical"
    }
  ],
  "ics": [
    {
      "id": "mqic1mos",
      "ref": "IC1",
      "part": "NE556",
      "pins": 14,
      "pin1": [
        1,
        5
      ],
      "span": 3,
      "autoCuts": [
        "1,6",
        "2,6",
        "3,6",
        "4,6",
        "5,6",
        "6,6",
        "7,6"
      ]
    }
  ],
  "pads": [
    {
      "id": "mqp01",
      "label": "9V",
      "at": [
        0,
        0
      ],
      "to": "supply positive, 9 V - through the power toggle from a DC jack or battery snap",
      "parts": [
        {
          "id": "SW1",
          "kind": "toggle",
          "lug": "C",
          "value": "SPST"
        }
      ]
    },
    {
      "id": "mqp02",
      "label": "PITCH_A",
      "at": [
        1,
        0
      ],
      "to": "pitch pot, one outer lug. The third lug stays empty",
      "parts": [
        {
          "id": "POT1",
          "kind": "pot",
          "lug": "1",
          "value": "B1M"
        }
      ]
    },
    {
      "id": "mqp03",
      "label": "PITCH_W",
      "at": [
        2,
        0
      ],
      "to": "pitch pot wiper",
      "parts": [
        {
          "id": "POT1",
          "kind": "pot",
          "lug": "W",
          "value": "B1M"
        }
      ]
    },
    {
      "id": "mqp04",
      "label": "CV_A",
      "at": [
        3,
        0
      ],
      "to": "pin 3, the astable's control voltage. Leave empty, or a 100k from a CV jack tip"
    },
    {
      "id": "mqp05",
      "label": "GND",
      "at": [
        9,
        0
      ],
      "to": "supply negative",
      "parts": [
        {
          "id": "DC1",
          "kind": "dc",
          "lug": "-",
          "value": "9 V"
        }
      ]
    },
    {
      "id": "mqp06",
      "label": "SYNC",
      "at": [
        8,
        11
      ],
      "to": "OUT A, the raw square at the pitch rate. Leave empty, or a 1k to a jack tip for a clock out"
    },
    {
      "id": "mqp07",
      "label": "SHAPE_W",
      "at": [
        3,
        13
      ],
      "to": "shape pot wiper",
      "parts": [
        {
          "id": "POT2",
          "kind": "pot",
          "lug": "W",
          "value": "B1M"
        }
      ]
    },
    {
      "id": "mqp08",
      "label": "CV_B",
      "at": [
        4,
        13
      ],
      "to": "pin 11, the one-shot's control voltage. Leave empty, or a 100k from a CV jack tip"
    },
    {
      "id": "mqp09",
      "label": "VOL_T",
      "at": [
        7,
        13
      ],
      "to": "volume pot lug 3, the top - the output, through C4",
      "parts": [
        {
          "id": "POT3",
          "kind": "pot",
          "lug": "3",
          "value": "B10K"
        }
      ]
    },
    {
      "id": "mqp10",
      "label": "SHAPE_A",
      "at": [
        8,
        15
      ],
      "to": "shape pot, one outer lug - through R2 to V+. The third lug stays empty",
      "parts": [
        {
          "id": "POT2",
          "kind": "pot",
          "lug": "1",
          "value": "B1M"
        }
      ]
    },
    {
      "id": "mqp11",
      "label": "GND_JACK",
      "at": [
        9,
        15
      ],
      "to": "volume pot lug 1 and the output jack sleeve",
      "parts": [
        {
          "id": "POT3",
          "kind": "pot",
          "lug": "1",
          "value": "B10K"
        },
        {
          "id": "JK1",
          "kind": "jack",
          "lug": "S",
          "value": "1/4 in"
        }
      ]
    }
  ],
  "offboard": [
    "JK1.T - POT3.W",
    "DC1.+ - SW1.1"
  ],
  "netlist": "# Mosquito 556 - written from the board\n# 10 strips of 16 holes, 14 parts, 1 chip, 9 cuts\n#\n# This is the circuit as the copper currently has it. Checking the board\n# against it can only pass - its use is to carry the circuit somewhere else.\n\n9V:       @9V IC1.4 IC1.10 IC1.14 R1.A R2.A C3.A\n\nGND:      @GND @GND_JACK IC1.7 C1.B C2.B C3.B\n\nPITCH_A:  @PITCH_A IC1.1 R1.B\nPITCH_W:  @PITCH_W IC1.2 IC1.6 C1.A\nSHAPE_W:  @SHAPE_W IC1.12 IC1.13 C2.A\nCV_A:     @CV_A IC1.3\nCV_B:     @CV_B IC1.11\nSYNC:     @SYNC IC1.5 IC1.8\nIC1_2OUT: IC1.9 C4.A\nVOL_T:    @VOL_T C4.B\nSHAPE_A:  @SHAPE_A R2.B"
}