« Back to DIY Kits

PCB · CD4046

Dragonfly VCO PCB v1.1

DIY PCB

The Dragonfly VCO on its v1.1 board. A CD4046 phase-locked loop used as a plain, well-behaved oscillator, with PITCH, RANGE and VOLUME on the board, an input and a mode switch that let the loop chase whatever you feed it, and now a CV input with a header of its own.

Nobody has built one of these boards yet, me included. The circuit is built and working: it is my Dragonfly VCO PCB, the v1.0 board. This is its v1.1 redraw. If you build one before I do, I would love to hear how it went.

  • Buildsthe Dragonfly VCO PCB v1.1 guide, free to read first
  • Board56 by 58 mm, two layers, every part's number and value printed on it
  • ChipsCD4046
  • Power9V DC, center negative
  • SolderingYes: every part goes through the board
  • Comes withThe board only. No parts, no enclosure
  • StatusBoards made, none built yet

The bare board. You bring the parts; the guide has the full list.

$12 + $6.50 shipping Email to Buy

Read the build first

The whole build is free on the Dragonfly VCO PCB v1.1 guide: the parts list to print, what goes on each header, the build order, and a drill template for the box. The board comes bare, so read the list before you buy and you will know what else you need.