PCB · CD4015 + CD4077
Termite PCB
The Termite on a printed board. A noise box from two logic chips: a shift register passes bits along on every tick of a clock, and an XNOR gate feeds two of them back in, so the pattern repeats every 127 ticks. Slow, that is a chattering rhythm of clicks; fast, it turns into a buzz. PITCH and VOLUME are on the board.
Nobody has built one of these boards yet, me included. The circuit is built and working: it is my Paper Termite, and the Termite on stripboard is the same circuit, value for value. If you build one before I do, I would love to hear how it went.
- Buildsthe Termite PCB guide, free to read first
- Board52 by 61 mm, two layers, every part's number and value printed on it
- ChipsCD4015 + CD4077
- Power9V DC, center negative
- SolderingYes: every part goes through the board
- Comes withThe board only. No parts, no enclosure
- StatusBoards made, none built yet
The bare board. You bring the parts; the guide has the full list.
Read the build first
The whole build is free on the Termite PCB guide: the parts list to print, what goes on each header, the build order, and a drill template for the box. The board comes bare, so read the list before you buy and you will know what else you need.