PCB · CD4093 + CD4070
Cicada NAND Mk II PCB
The Cicada NAND Mk II on a printed board. The Cicada's four voices on one CD4093, and a CD4070 that lets them work on each other: every voice has a gate that turns it off, lets it run, or hands it to a partner voice to chop, and an XOR switch that swaps it for the XOR of itself and that partner. Four PITCH pots, TONE and VOLUME are on the board, and each voice has one header for its jack and toggles.
Nobody has built one of these boards yet, me included. The circuit is the Cicada NAND Mk II on stripboard, value for value, which nobody has built yet either. Its four oscillators are the Cicada NAND's, and that one is built and working. If you build one before I do, I would love to hear how it went.
- Buildsthe Cicada NAND Mk II PCB guide, free to read first
- Board80 by 95 mm, two layers, every part's number and value printed on it
- ChipsCD4093 + CD4070
- Power9V DC, center negative
- SolderingYes: every part goes through the board
- Comes withThe board only. No parts, no enclosure
- StatusBoards made, none built yet
The bare board. You bring the parts; the guide has the full list.
Read the build first
The whole build is free on the Cicada NAND Mk II PCB guide: the parts list to print, what goes on each header, the build order, and a drill template for the box. The board comes bare, so read the list before you buy and you will know what else you need.