PCB · 3× NE555
The Popo PCB
The Popo on a printed board: a cop-car siren with a woop button and a wail switch, and a red and blue wig-wag flashing over it. Three 555s, marked on the board by what they do: SIREN, WAIL and LIGHTS. The red and blue LEDs are on the board, and the pitch pot, the button, the switch and the jacks go on headers.
Nobody has built one of these boards yet, me included. The circuit is The Popo on stripboard, value for value: my built Siren and my built Police Lights on one board, which nobody has built as one board yet either. If you build one before I do, I would love to hear how it went.
- Buildsthe The Popo PCB guide, free to read first
- Board74 by 52 mm, two layers, every part's number and value printed on it
- Chips3× NE555
- Power9V DC, center negative
- SolderingYes: every part goes through the board
- Comes withThe board only. No parts, no enclosure
- StatusBoards made, none built yet
The bare board. You bring the parts; the guide has the full list.
Read the build first
The whole build is free on the The Popo PCB guide: the parts list to print, what goes on each header, the build order, and a drill template for the box. The board comes bare, so read the list before you buy and you will know what else you need.