« Back to DIY Kits

PCB · LM317

Power Starve PCB

DIY PCB

The Power Starve on a printed board the size of a postage stamp, 21 by 22 mm, to go inside the toy. An LM317 sits between the supply and the toy, and the pot only sets the regulator's reference, so the toy's current never runs through the pot's track. Eight parts on the board, and one row of eight labeled pads for everything that leaves it.

Nobody has built one of these boards yet, me included. The circuit is built and working: it is my Power Starve on stripboard, part for part and value for value. If you build one before I do, I would love to hear how it went.

  • Buildsthe Power Starve PCB guide, free to read first
  • Board21 by 22 mm, two layers, every part's number printed on it
  • ChipsLM317
  • PowerSits between a toy and its own supply
  • SolderingYes: every part goes through the board
  • Comes withThe board only. No parts, no enclosure
  • StatusBoards made, none built yet

The bare board. You bring the parts; the guide has the full list.

$6 + $6.50 shipping Email to Buy

Read the build first

The whole build is free on the Power Starve PCB guide: the parts list to print, what goes on each header, the build order. The board comes bare, so read the list before you buy and you will know what else you need.