« Back to DIY

PCBs

Printed boards for the stripboard and paper builds.

Printed circuit boards for builds that started on stripboard or paper. Every part has its own holes and its number printed beside it, and everything that leaves the board leaves from a labeled header. Each guide has the parts list, what goes on each header, and the order to build it in. Every value on a board is the value on the build it came from, and the guide says where the board differs.

All 15 guides

Open: Build the Opto Duet CV PCB
Mine Synth / 2× NE555 56 × 62 mm board

Opto Duet CV PCB

The Opto Duet CV on a printed board, 56 by 62 mm: two 555s chained by light, with TEMPO, LEVEL and PITCH pots on the board, a line out and a pitch CV input.

By Onion Madder
Read the guide »
Open: Build the Spider Sequencer PCB
Mine Sequencer / CD4017 + NE555 74 × 82 mm board

Spider Sequencer PCB

The Spider Sequencer on a printed board, 74 by 82 mm: a 555 clocking a CD4017 through eight steps, with all nine pots and eight LEDs on the board.

By Onion Madder
Read the guide »
Open: Build the Dragonfly VCO PCB
Mine Oscillator / CD4046 56 × 50 mm board

Dragonfly VCO PCB

The Dragonfly VCO on a printed board, 56 by 50 mm: a CD4046 oscillator with PITCH, RANGE and VOLUME on the board and an input the loop can chase.

By Onion Madder
Read the guide »
Open: Build the Cicada NAND PCB
Mine Drone / CD4093 56 × 78 mm board

Cicada NAND PCB

The Cicada NAND on a printed board, 56 by 78 mm: four voices from one CD4093, four PITCH pots on the board and a gate for each voice.

By Onion Madder
Read the guide »
Open: Build the Grubworks PCB
Mine Synth / CD4024 + TL072 + 4× NE555 86 × 100 mm board

Grubworks PCB

Grubworks on a printed board, 86 by 100 mm: an Opto Duet and an Atari Punk Console clocking a CD4024 divider, with all six pots on the board.

By Onion Madder
Read the guide »
Open: Build the Opto Duet CV PCB v1.1
Mine Unverified Synth / 2× NE555 55 × 69 mm board

Opto Duet CV PCB v1.1

The Opto Duet CV's v1.1 board, 55 by 69 mm: two 555s chained by light, 9 mm pots on the board, every value printed on it, and a power light header.

By Onion Madder
Read the guide »
Open: Build the Spider Sequencer PCB v1.1
Mine Unverified Sequencer / CD4017 + NE555 82 × 58 mm board

Spider Sequencer PCB v1.1

The Spider Sequencer's v1.1 board, 82 by 58 mm: a 555 clocking a CD4017 through eight steps, with every pot and LED on a header of its own.

By Onion Madder
Read the guide »
Open: Build the Dragonfly VCO PCB v1.1
Mine Unverified Oscillator / CD4046 56 × 58 mm board

Dragonfly VCO PCB v1.1

The Dragonfly VCO's v1.1 board, 56 by 58 mm: a CD4046 oscillator with 9 mm pots on the board, a CV IN header and a power light header.

By Onion Madder
Read the guide »
Open: Build the Cicada NAND PCB v1.1
Mine Unverified Drone / CD4093 56 × 78 mm board

Cicada NAND PCB v1.1

The Cicada NAND's v1.1 board, 56 by 78 mm: four voices from one CD4093, four 9 mm PITCH pots on the board, flat resistors and a power light header.

By Onion Madder
Read the guide »
Open: Build the Grubworks PCB v1.1
Mine Unverified Synth / CD4024 + TL072 + 4× NE555 93 × 71 mm board

Grubworks PCB v1.1

Grubworks' v1.1 board, 93 by 71 mm: an Opto Duet and an Atari Punk Console clocking a CD4024 divider, with all six pots on headers and a BUS pin for every octave toggle.

By Onion Madder
Read the guide »
Open: Build the Mosquito Mk II PCB
Mine Unverified Synth / 2× NE555 56 × 70 mm board

Mosquito Mk II PCB

The Mosquito Mk II on a printed board, 56 by 70 mm: the Atari Punk Console on two 555s, with three 9 mm pots, the power toggle and the power light all on the board.

By Onion Madder
Read the guide »
Open: Build the Power Starve PCB
Mine Unverified Tool / LM317 21 × 22 mm board

Power Starve PCB

The Power Starve on a printed board, 21 by 22 mm: an LM317 voltage starve for circuit bending, eight parts and one row of labeled pads, small enough to go inside the toy.

By Onion Madder
Read the guide »
Open: Build the The Popo PCB
Mine Unverified Siren / 3× NE555 74 × 52 mm board

The Popo PCB

The Popo on a printed board, 74 by 52 mm: a three-555 police siren with a woop button, a wail switch, a pitch CV input and red and blue lights on the board.

By Onion Madder
Read the guide »
Open: Build the Termite PCB
Mine Unverified Noise / CD4015 + CD4077 52 × 61 mm board

Termite PCB

The Termite on a printed board, 52 by 61 mm: a two-chip shift register noise box, clicks to buzz, with PITCH and VOLUME pots on the board.

By Onion Madder
Read the guide »
Open: Build the Cicada NAND Mk II PCB
Mine Unverified Drone / CD4093 + CD4070 80 × 95 mm board

Cicada NAND Mk II PCB

The Cicada NAND Mk II on a printed board, 80 by 95 mm: four CD4093 voices that gate and XOR each other, with six 9 mm pots on the board and a header for every voice.

By Onion Madder
Read the guide »